Skip to content

Play After Dark

Court Lighting & Fencing in Raleigh

A fully enclosed, evenly lit court you can use after dark without bothering the neighbors.

  • Free On-Site Evaluation
  • Itemised Written Estimate
  • Raleigh & Surrounding Areas
  • Final Walkthrough Included
An empty outdoor tennis court with blue and green surfaces at sunrise, surrounded by a fence and trees.

What Goes Wrong

Common shortcuts that leave courts dark, leaky, or unsafe

Fencing and lighting each have failure modes that show up fast when the planning is skipped.

Unplanned Pole Placement

Poles set without a coverage plan create dark spots at the baselines where play is most active.

Coverage-First Layout

Pole positions are chosen from the court dimensions first, so foot-candle coverage is even before a hole is dug.

Outward-Aimed Fixtures

Fixtures mounted without beam-angle planning throw light into neighboring yards and draw complaints fast.

Inward & Downward Aim

LED fixtures are specified by beam angle and aimed inward so spill toward adjacent properties is controlled by design.

Wrong Fence Height

A fence sized for aesthetics rather than the sport lets balls escape and forces constant retrieval from neighboring yards.

Sport-Matched Panel Height

Tennis enclosures run 10 feet; basketball and pickleball use lower panels where ball containment is the primary goal.

Patching Corroded Posts

Replacing mesh panels while leaving corroded posts in place is a fix that typically fails within a single season.

Condition Assessment First

Post integrity, mesh condition, and gate hardware are all checked before a written scope is prepared for any re-fence.

Common problems, answered

Scope of Work

What court lighting & fencing covers

Both systems are planned together so pole placement, fence line, and gate access all work as one layout.

LED Court Lighting Installation

Pole setting, fixture mounting, and beam aiming sized to the court dimensions for even coverage with no dark spots.

Chain Link Enclosure Fencing

Post setting, mesh panel installation, and fence-line layout matched to the sport and the site boundary.

Gate Placement & Access Points

Gate positions are planned for practical entry and exit, not just the nearest property edge or convenience.

Fence Repair & Replacement Assessment

Condition review of posts, mesh, and hardware on aging fences to determine whether repair or full re-fence is the right scope.

Glare Control Planning

Fixture aiming adjusted to reduce spill toward neighbors.

Aluminum & Steel Materials

Fence posts and panels in aluminum or galvanized steel.

HOA & Backyard Courts

Residential backyards and HOA common areas both served.

Play After Dark, Stay Enclosed

Lighting and fencing work together to make a court fully usable and contained

Raleigh’s long warm season makes evening play practical, and residential lot spacing makes glare control a real concern.

Request an Estimate

Lighting layout starts with the court dimensions and orientation. Pole positions are chosen to deliver even foot-candle coverage across the full playing surface, with fixtures aimed inward and downward to minimize spill toward neighboring yards. LED fixtures are specified for their output and beam angle, not just wattage, so the coverage pattern is planned before poles are set rather than adjusted after the fact.

Fencing is designed around the sport and the site. Tennis enclosures typically run 10 feet high; basketball and pickleball courts use lower panels where ball containment is the primary goal. Post depth is set to handle wind load on the mesh panels, and the fence line is laid out to follow the court boundary with consistent clearance. Gate placement is planned for practical access, not just the nearest property edge.

For existing courts with aging fences, a condition assessment determines whether post replacement, panel repair, or a full re-fence is the right scope. Replacing only damaged panels while leaving corroded posts in place is a short-term fix that typically fails within a season. The assessment covers post integrity, mesh condition, and gate hardware before a written scope is prepared.

Why Choose Us

Why choose us for court lighting & fencing in Raleigh?

Process and accountability that keep the project on scope from first visit to final walkthrough.

On-Site Evaluation Before Any Scope

No estimate is written until the site, drainage, and setbacks are reviewed in person by a local partner.

Itemised Estimate, Line by Line

Lighting, fencing, and gate work are each priced separately so you see exactly what you are paying for.

Final Walkthrough Sign-Off

The job is not closed until you walk the finished court and confirm every element meets the agreed scope.

Backyard to HOA Common Areas

Local partners handle residential backyards, HOA facilities, and school courts across the Raleigh area.

Wide Local Service Area

Coverage extends to Durham, Cary, Apex, Chapel Hill, and Wake Forest, not just the Raleigh city limits.

A completed sports court builder job at a house
A sports court builder job seen in full

The Process

From first enquiry to a lit, enclosed court

Request an Estimate

  1. 01

    Request Your Evaluation

    Submit your court details and a local partner arranges a free on-site visit to assess the space, sport, and setbacks.

  2. 02

    Review Your Written Estimate

    You receive an itemised estimate covering pole setting, fixture mounting, fencing, and gate placement as separate line items.

  3. 03

    Complete the Final Walkthrough

    Once installation is done, you walk the court with the team and sign off only when every element matches the agreed scope.

Pricing Estimates

Typical Court Lighting & Fencing Prices

JobTypical cost
Fencing only$5,000-$15,000
Lighting only$8,000-$20,000
Lighting and fencing package$15,000-$35,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about court lighting & fencing

Do I need both fencing and lighting for my sports court, or can I get by with one?

Neither is strictly required, but each solves a different problem. Fencing keeps balls in play and defines the court boundary; lighting extends usable hours into evenings. If you only play during daylight, fencing alone may be enough. If evening play matters to you, lighting becomes the higher priority of the two.

Can the court lights be set up so they do not bother my neighbors?

Yes. Fixtures with full-cutoff optics direct light downward onto the court surface and sharply limit sideways spill. Pole placement, mounting height, and aiming angle are all adjusted during layout to keep light off neighboring yards and windows. The on-site evaluation accounts for your property lines and any nearby homes before the design is finalized.

How do I know if my court layout is right for fencing and lights?

The on-site evaluation checks court dimensions, setbacks from property lines, overhead obstructions, and drainage before any design is proposed. If the current layout has issues, they are identified in writing before work begins, so you are not discovering problems mid-project.

Will the lights give even coverage across the whole court?

Even coverage depends on pole count, spacing, mounting height, and fixture beam angle, all of which are calculated for your specific court size and sport. A properly designed layout eliminates dark spots at the baselines and corners, which are the areas most likely to be underlit when fixtures are placed without a photometric plan.

Can you keep glare low for players and nearby homes?

Yes. Full-cutoff LED fixtures with shielded housings are the standard approach. Mounting height and aiming angle are set so players looking up toward the light source see the shield, not the bare lamp. That same geometry keeps spill light from reaching neighboring properties.

How much will court lighting and fencing cost me?

Most court lighting and fencing projects in the Raleigh area come in at $5,000-$15,000, depending on court size, fence height, number of light poles, and electrical run length. You receive an itemised written estimate after the on-site evaluation, so every line item is visible before you commit.

How long will my court be out of use while the work is being done?

Fencing installation on a standard backyard court typically takes one to two days. Adding lighting, including trenching for conduit and setting pole footings, adds another one to two days, with a short cure period before poles are loaded. Your written estimate will include a project timeline specific to your scope.

Can the lights be aimed so the court is bright without spilling too much light around the property?

Yes. Fixture aiming is set during installation so the beam pattern covers the court surface and drops off sharply at the perimeter. Full-cutoff housings prevent upward light scatter. Pole placement relative to property lines is part of the design review, not an afterthought.

More questions about Court Lighting & Fencing?

Tell Us the Site & the Sport

Share your space and what you want to play, and we’ll arrange an on-site evaluation and a written estimate covering every stage of the work.

Request an Estimate